PROGRAMME DES FOURNISSEURS D’ÉDUCATION (PFÉ)

Concrete structures often face some of the most challenging environments, where chemical reactions can rapidly cause erosion and reduced service life. This course explores how acid attack, microbially induced corrosion (MIC), and carbonation compromise the structural integrity of concrete. It covers the origins and damaging effects of these processes, such as cracking, spalling, and corrosion. Learners will discover waterproofing strategies that prevent deterioration through performance-based admixtures that combine antimicrobial and crystalline technologies, along with a visual detection system for on-site verification. Designers will be better equipped to specify protective measures that extend the service life of concrete structures, reduce long-term maintenance, and lower the project’s carbon footprint.

ONGOING - FREE

Historically, traditional waterproofing methods involve the placement of a barrier or membrane between the concrete and water. Unlike membranes and other surface systems, crystalline waterproofing is designed to make the concrete itself waterproof. This course discusses how crystalline waterproofing technology provides a high level of performance to concrete structures and what design professionals need to know in order to specify and understand how this chemical technology can improve building projects, cut costs, and help earn LEED® credits.

Concrete-faced insulated products are composite prefinished panels that are used to construct walls and roofing assemblies to maximize the energy efficiency, durability, and performance of a building envelope. This course discusses the design criteria used in designing energy-efficient buildings using concrete-faced continuous insulation systems for low-slope roofing, walls, and foundations. The functional and physical features of protective membrane roof (PMR) systems, concrete-faced insulated panels for walls and foundations, and concrete structural insulated panels (CSIPs) are evaluated. 

Concrete is the backbone of modern construction, and it comes with an environmental cost, as do most construction materials. This course explores concrete’s contributions to global greenhouse gas (GHG) emissions and current and emerging solutions to reduce emissions throughout its entire life cycle. Climate-positive design strategies to improve the carbon footprint of exterior projects are presented. Real-world projects demonstrate how permeable pavements are a sustainable alternative to poured concrete surfaces, offering numerous environmental benefits.

Electric vehicles (EVs) are rapidly becoming ubiquitous. To serve them sufficiently, there must be a massive expansion of car charging options, and that infers that planners and designers must create those options and opportunities now. This course examines the current trends in, and predictions for, EV chargers, the various types and their attributes, where and how they might be installed for maximum effectiveness, and the programs and incentives that apply to both EVs and their charger requirements.

Universal hot water availability is generally taken for granted. At a time when energy prices and sources, environmental concerns, and water shortages are increasing in significance, it is important to produce hot water in a manner that addresses all these issues. This course explains how electric tankless water heaters (ETWHs) do this while also improving health and safety conditions and reducing costs. The examination includes detailed descriptions of many types of ETWHs and the basic calculations and selection criteria for the most suitable system.

Green facades can contribute to building energy efficiency, durability, aesthetic value, sustainability, and cost effectiveness in the performance of ecological system services. This course examines the considerations required for successful green facade installations and includes discussions on system selection, design, plant selection, maintenance, and client/owner education.

A number of third-party entities have certified the sustainable attributes of solid surfaces. This course explores those green product certifications in relation to the characteristics of 100% acrylic solid surfaces. It includes an overview of current manufacturing, fabrication, and thermoforming processes, the aesthetics, and the many possible applications and design opportunities for solid surfaces.

ONGOING - FREE - 1 HOUR

Electric heating systems have been in use for over a century, and in that period, they have significantly advanced in terms of their efficiency, cost effectiveness, safety, versatility, and appearance. Recently, electricity production itself has become more and more environmentally friendly and economically viable. This course explores how the wide range of contemporary electric heating options can efficiently and economically address virtually every heating need in every building type and thus capitalize on the steadily increasing benefits of electricity to create the most environmentally responsible and economically viable heating solutions.

ONGOING - FREE - 1 HOUR

Lighting controls allow homeowners to adjust lamps and light fixtures from anywhere in the home without special wiring or expensive master controllers. Lighting controls can be integrated into a home for single-room, multiroom, whole-house, or automated systems. This course discusses the role of lighting in design and occupant comfort and then outlines how lighting controls can benefit occupant behavior, health, and productivity and the appeal and performance of the home, especially regarding energy efficiency.

Various surveys indicate that up to 90% of Americans prefer showering over bathing. In addition, there are many for whom bathtubs are major hazards and who must use an accessible shower. As a result, showers are the new norm for the hospitality industry and are often a central design element in hospitality and multifamily units. They are also often the choice and focus of seniors modifying their homes to facilitate aging in place and homeowners updating their bathrooms to increase their property value. This illustrated course discusses the three basic types of contemporary shower enclosures, their installation requirements and specifications, the wide range of glazing options and appearances available, and applicable codes and standards that inform and/or regulate shower installations.

The fireplace has always been a focal point in any home, providing warmth and a place for friends and family to gather. Today’s wood-burning fireplaces, inserts, and stoves have become increasingly efficient and clean burning. This course examines using wood as a fuel source and discusses the many characteristics that can affect heat production, efficiency, and burn time. New burning technologies that meet EPA certification requirements for released particulate matter are summarized, as are design and installation specifications.

ON-GOING 1.25 hrs

This course outlines the importance of creating continuity of control layers in building systems. It covers code requirements, typical design of control layers in exterior walls, and approaches to detailing. You will learn how to evaluate systems to obtain durable interface performance and gain a fresh perspective on your own past and future builds.

Online, Self-Paced - 2.25 Hours

This series is comprised of 7 courses (15 minutes each) on current challenges in the practice of architecture and design.

Prequalification of contractors is a method used to manage the risks of an open tender process. It ensures the contractors invited to bid on the project have demonstrated applicable experience and are capable of delivering the necessary quality and value. This course is a primer on contractor prequalification and describes who benefits from the process, the applicable project delivery methods, the role of the architect, the typical information requested of the contractor, and when to use prequalification and when not to.

Contrast therapy, the controlled use of heat and cold, has supported health, recovery, and wellness practices for centuries. This course examines the science, design, and construction of modern contrast therapy environments, including saunas, steam rooms, and cold rooms. It explains how temperature control, material specification, and system design influence safety, hygiene, and performance. The course also addresses how prefabricated systems improve installation efficiency, durability, and indoor environmental quality.